JDMSPEED 977-325 Throttle Body Assembl For Nissan Altima 2013-2018 Rogue L4 2.5L 2014-19

Installation Position: Inside

Direct Replacement

Package Included:1* Throttle Body

Part Numbers:

16119-3TA0A   16119-EA00D

16119-EA000   16119-EA00A

16119-EA00B   16119-EA00C

Fitment:

For 2009-2012 Suzuki Equator

For 2014-2019 Nissan Rogue

For 2005-2019 Nissan Frontier

For 2013-2018 Nissan Altima

Installation:

Remove the air cleaner assembly.

Remove the accelerator cable.

First, rotate the throttle control mechanism to the maximum position, pull it with the left hand and pinch the accelerator cable with the right hand, and remove it from the notch of the control mechanism.

Then take off the line from the accelerator cable      support, take the lower limit clip and gasket, and put them in a safe place.

Finally, remove the accelerator cable bracket fixed on the throttle body.

Loosen the 3 fastening bolts on the throttle body with an Allen key and remove the throttle body.

Remove the sealing rubber ring at the joint between the throttle body and the air filter to prevent the cleaning agent from corroding the rubber ring and causing the rubber ring to swell and break.

After removing the sealing rubber ring, check whether there are signs of aging and cracks.

Clean the throttle body.

The installation is complete.